posted October 02, 2009 03:22 PM
My GS1200'S seem to spill an awful lot of light onto the ceiling, so I want to make a light baffle that will bolt onto the hinged lamphouse cover. I know the GS1200 XENON version has such a baffle, so I am wondering if Kev or anyone with a Xenon could post a couple of pics of the light baffle so I can design up something almost identical.
-------------------- The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection, Elmo GS1200 f1.0 2-blade Eumig S938 Stereo f1.0 Ektar Panasonic PT-AE4000U digital pj
Posts: 1269
From: Thetford , Norfolk,England
Registered: May 2008
posted October 06, 2009 12:45 PM
Click "post Reply", then click "Click here to upload an image" (to the right of Preview Post). This takes you to the Instructions. Martin
-------------------- Retired TV Service Engineer Ongoing interest in Telecine....
Posts: 977
From: Ortona, Italy
Registered: Jan 2004
posted October 06, 2009 02:39 PM
Hi, I finally succeded to upload the image requested, but I am afraid given the size/dimensions constraints it will be of little use.
Anyway this is it:
The baffle is the darker structure which is simply screwed to the regular grid of the side cover; to be honest there is indeed some light spills anyway...
Posts: 963
From: Melbourne, Victoria, Australia
Registered: Feb 2006
posted October 06, 2009 05:02 PM
Hi Paul, I had the same frustration with my Elmo and Eumig projectors. My solution was to make sure this house had a projection room! No projector noise and no light leakage.
The light shielding has always been so much better in 16mm projectors, have you noticed?
posted October 06, 2009 06:51 PM
Thanks Maurizio - I have sent you an email.
-------------------- The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection, Elmo GS1200 f1.0 2-blade Eumig S938 Stereo f1.0 Ektar Panasonic PT-AE4000U digital pj