8mm Forum: Elmo 912 editor

»	8mm Forum » 8mm Forum » Elmo 912 editor

UBBFriend: Email this page to someone!

Author

Topic: Elmo 912 editor

Geoff Rogers
Junior
Posts: 8
From: Hampshire. UK
Registered: Oct 2008

posted October 10, 2009 10:21 AM

Hello

I've just purchased an Elmo 912 editor and need a manual for it. If anyone can point me in the right direction of one I'd be most greatful.

Geoff Rogers

| IP: Logged

John Davis
Master Film Handler

Posts: 286
From: Dunfermline, Fife, UK
Registered: Jun 2008

posted October 10, 2009 11:31 AM

Hi Geoff,
go to http://www.super8data.com/ and click on 'manuals' , under 'viewers/editors' there is a link to a 'Goko G1001'. this should do as the machines were very similar and probably both came from the Goko factory,
John

| IP: Logged

Geoff Rogers
Junior
Posts: 8
From: Hampshire. UK
Registered: Oct 2008

posted October 11, 2009 03:29 PM

Hello John

Thanks for the link, the Goko G1001 is not a dual editor whereas the Elmo 912 is. I was wondering how you change between super 8 and standard 8.

Geoff

| IP: Logged

Joe Taffis
Phenomenal Film Handler

Posts: 1592
From: United States
Registered: Jun 2003

posted October 11, 2009 04:09 PM

Geoff, I have the original Elmo manual if you need a copy, but to change from regular/standard 8 to super 8 (or vice versa), just turn the slot under the sprocket wheel with your fingernail or a flat edge screwdriver. [Smile]

--------------------
Joe Taffis

| IP: Logged

Geoff Rogers
Junior
Posts: 8
From: Hampshire. UK
Registered: Oct 2008

posted October 11, 2009 05:01 PM

Hello Joe

If you can email me a copy that would be great.

email addtress rogersga at btinternet dot com

Thanks
Geoff Rogers

| IP: Logged

Joe Taffis
Phenomenal Film Handler

Posts: 1592
From: United States
Registered: Jun 2003

posted October 12, 2009 03:43 PM

hi Geoff, just sent you scans of the manual, let me know if they're big enough.

--------------------
Joe Taffis

| IP: Logged

Geoff Rogers
Junior
Posts: 8
From: Hampshire. UK
Registered: Oct 2008

posted October 12, 2009 04:00 PM

Hi Joe

Thanks for the scans, I've sent you an email.

Geoff

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2