8mm Forum: How on Earth...Eumig 610

»	8mm Forum » 8mm Forum » How on Earth...Eumig 610

UBBFriend: Email this page to someone!

Author

Topic: How on Earth...Eumig 610

Jon Addams
Jedi Master Film Handler

Posts: 638
From: New York, NY, USA
Registered: Apr 2007

posted April 03, 2010 02:43 PM

How on earth can you change the motor belt on an Eumig 610D without taking the whole machine apart?

Thanks

Jon

| IP: Logged

Douglas Meltzer
Moderator

Posts: 4554
From: New York, NY, USA
Registered: Jun 2003

posted April 03, 2010 04:03 PM

Jon,

According to the manual:

Doug

--------------------
I think there's room for just one more film.....

| IP: Logged

Jon Addams
Jedi Master Film Handler

Posts: 638
From: New York, NY, USA
Registered: Apr 2007

posted April 03, 2010 09:45 PM

Hello Doug,

I didn't have the manual.

Thank you for the drawing and instructions. Looking at the drawing and reading the instructions it appears simpler than putting one foot in front of the other when walking. However, in actuality it’s a heck of a chore, it’s almost impossible to get the belt in place as there’s literally no space to feed it at the top.

I changed the belt all right but I still think it may have been easier by taking the machine apart. [Big Grin]

WOW!!!

Thanks again,

Jon

| IP: Logged

Douglas Meltzer
Moderator

Posts: 4554
From: New York, NY, USA
Registered: Jun 2003

posted April 03, 2010 10:11 PM

Jon,

Sorry it was so tough, but I'm glad it worked out. I've e-mailed you the manual.

Doug

--------------------
I think there's room for just one more film.....

| IP: Logged

Jon Addams
Jedi Master Film Handler

Posts: 638
From: New York, NY, USA
Registered: Apr 2007

posted April 04, 2010 12:10 AM

Thanks for the manual Doug, it's one of the few I didn't have.

Regards,

Jon

| IP: Logged

Mikael Barnard
Film Handler

Posts: 85
From: Leighton Buzzard, Bedfordshire, UK
Registered: Jun 2009

posted April 04, 2010 07:00 PM

This is the main reasons I HATE 610Ds, that belt is such a PIG to change!

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2