Claudio Corsi
Junior
Posts: 1
From: Sudbury, Ontario, Canada
Registered: Apr 2010
|
posted April 14, 2010 02:15 PM
I'm in the process of transferring some old 8mm home movies to digital, I've built a rig to essentially take a high res image of each frame of the film, which I then reassemble into a video.
The main issue is that the film does have some scratching, I know that there are products ( filmguard ) and devices to handle that situation under normal circumstances. The question is if I have a mechanism to clean the film before it enters my rig will the cleaning fluid survive (not evaporate?) until it enters the machine. Keeping in mind the rig runs at about 1 frame every 4 or 5 seconds. Any suggestions would be welcome.
Claudio
Here is a sample frame
| IP: Logged
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
