|
Author
|
Topic: Sound head wanted for a Sankyo Stero 800
|
|
|
Barrie Didham
Film Handler
Posts: 67
From: Dunedin,New Zealand
Registered: Sep 2009
|
posted June 04, 2010 05:30 AM
These heads just plug into the board,make sure its not loose or the wires broken.
I have a whole block from a 700,im sure the heads are the same but am not sure,but the block might not be,its in perfect condition from a projector that was dropped,so i bought it for $150 and stripped it for parts,but have since sold my Sankyo 700.
I dont know what these head blocks are worth,maybe someone here can tell me and if you have no luck we can try and work out a way to do a deal,i dont use a visa just now and dont have pay pal.
I,ll have a look and get back to you.
--------------------
Between Heaven and Hell there will always be Super8
| IP: Logged
|
|
Maurizio Di Cintio
Jedi Master Film Handler
Posts: 977
From: Ortona, Italy
Registered: Jan 2004
|
posted June 04, 2010 03:18 PM
Please keep in mind the PA circuitry may be a little different with a different path for the sound to follow: you might have a problem with the very circuitry on the magnetic pre-amp board, even a condenser may give problems if it's interrupted; have you checked for problems like these? Sound heads are very hard on the Sankyo's, almost as hard as Elmo's (albeit the pressure pads are prolly less gentle...), so IMHO it's rather unlike the heads are totaly worn-out in your machine.
Anyway, I have some of these specifically for the Stereo 800, complete with support block, pressure pads and all the wirings and connectors to the sound board: ready to install, no soldering and next to no adjusting needed. They are factory new, never used, purchased from the Swiss Sankyo representative about ten years ago.
If interested, please email me:
maurizio_dicintio (at) fastwebnet (dot) it
--------------------
Maurizio
| IP: Logged
|
|
|
|
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
