This is topic How to Remove Drive Pulley in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006105

---

Posted by Dan Lail (Member # 18) on March 23, 2011, 04:07 PM:
 
Update! The pulley is off. Remove the transformer. Remove the circuit board. Release the motor mount screws. Loosen Pulley screws and remove.

Anyone know how to remove the drive pulley from an ST-1200HD. It's the double pulley mounted on the motor armature. Do you remove the shutter wheel or loosen the motor mounts.

[ March 23, 2011, 06:50 PM: Message edited by: Dan Lail ]
 

---

Posted by Pasquale DAlessio (Member # 2052) on March 24, 2011, 07:09 PM:
 

 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2