8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » My First Elmo 1200D

 - UBBFriend: Email this page to someone!    
Author Topic: My First Elmo 1200D
Christopher Allison
Film Handler

Posts: 51
From: Costa Mesa Ca, USA
Registered: Dec 2009


 - posted October 11, 2011 01:49 PM      Profile for Christopher Allison   Email Christopher Allison   Send New Private Message       Edit/Delete Post 
Hello everyone,
I just purchased my first Elmo ST-1200D, as the seller stated the unit needs new replacement belts (hope that’s all it needs). I’ve been perusing E-bay auctions for the replacement belts and have come across a couple of sellers that have these in stock. Everything looks good except the seller states the replacement belts are for later or early models “New, 4 Belt Set, for the Later Elmo St-1200 D ” also this one as well “2 Belt Set, Note: For, Early Elmo St-1200 D”. So my question is, I have the original warranty card from the sell and the purchase date was 1977 and the serial is # 22199.

I also heard later models have film counters and early models do not have film counters, is this true?
Thanks

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2