8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Film Storage

 - UBBFriend: Email this page to someone!    
Author Topic: Film Storage
Roger Shunk
Jedi Master Film Handler

Posts: 604
From: Phoenix, AZ
Registered: Nov 2011


 - posted December 15, 2011 02:00 PM      Profile for Roger Shunk   Author's Homepage     Send New Private Message       Edit/Delete Post 
What is the best way to store your 8mm films? In an upright position or flat?

Thanks,
Roger

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted December 15, 2011 02:15 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
The gripe I have with storing them flat is if they are in a pliable container the reels will tend to get squished (and distorted)from things piled on top of them. It gets especially nasty when you have a feature with multiple reels in a box and the last reel is partially empty and on the bottom.

In a rigid case (like a Gepe or Bonum) it's fine, but then again if you pile them one on top of the other it's pretty easy to start a film avalanche when you want one near the bottom.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Joe Taffis
Phenomenal Film Handler

Posts: 1592
From: United States
Registered: Jun 2003


 - posted December 15, 2011 03:37 PM      Profile for Joe Taffis   Email Joe Taffis   Send New Private Message       Edit/Delete Post 
Both ways works for me. Never had any problems the last 45 years or so.... [Wink]

--------------------
Joe Taffis

 |  IP: Logged

Brad Kimball
Phenomenal Film Handler

Posts: 1171
From: Highland Mills, NY USA
Registered: Jun 2003


 - posted December 21, 2011 03:53 PM      Profile for Brad Kimball   Email Brad Kimball   Send New Private Message       Edit/Delete Post 
Film in cans I store flat and all others are library style (upright). I don't store anything without a box or a can. I'm too o.c.d. for that.

 |  IP: Logged

Bradford A Moore
Master Film Handler

Posts: 272
From: Provincetown, Ma
Registered: Jul 2005


 - posted December 21, 2011 05:24 PM      Profile for Bradford A Moore     Send New Private Message       Edit/Delete Post 
I would go with flat too. Don't store in metal cans! Best in original cardboard boxes, or plastic reels with plastic cans that have air holes. Films must breathe! Also try and keep your films tightly wound to help prevent warpage.

 |  IP: Logged

William Mouroukas
Film Handler

Posts: 49
From: Sydney - Australia
Registered: Oct 2011


 - posted December 21, 2011 11:00 PM      Profile for William Mouroukas     Send New Private Message       Edit/Delete Post 
Thanks for the advice on this as I was also thinking to ask.

 |  IP: Logged

Joe Caruso
Film God

Posts: 4105
From: USA
Registered: Jun 2003


 - posted December 22, 2011 05:57 AM      Profile for Joe Caruso     Send New Private Message       Edit/Delete Post 
I expounded on this before, and my strong counsel is to store such films vertically, whether box or can - Now, I have some that are stacked (4 at most), but that is an exception - The idea of horizontal is that cans and boxes get undue pressure resulting in a toppling over and damage thereof - I've found this works for me many years and my oldest films still run fine. This applies to old LPs, and such recordings, books, even comic books; Vertically all the way - Shorty

 |  IP: Logged

Bradford A Moore
Master Film Handler

Posts: 272
From: Provincetown, Ma
Registered: Jul 2005


 - posted December 22, 2011 06:39 AM      Profile for Bradford A Moore     Send New Private Message       Edit/Delete Post 
A record absolutely should be vertical, but film stacking vertically can help with warping, and baggy syndrome. Keeping a film flat, and tightly wound should keep the film tighter longer. Having it horizontal will loosen the winding faster than not.

I keep my feature films in there original boxes if possible, and stack them about 4 or 5 features, which depends on the reels, which is usually 4 to 5 400ft reels. The lesser ones with two or three should go on top not on the bottom. I find using a old unused wooden book case works well too.

 |  IP: Logged

William Mouroukas
Film Handler

Posts: 49
From: Sydney - Australia
Registered: Oct 2011


 - posted December 22, 2011 04:05 PM      Profile for William Mouroukas     Send New Private Message       Edit/Delete Post 
Okay so tight winding is clearly important. Interesting to hear the case for vertical. Not long ago I saw on You Tube a story that included the film vault of a major studio, Disney I think. They had all their masters in cans horizontal on individual brackets / shelves, no cans resting on another.
None of my projectors do what I'd consider a tight wind so it looks like I need some manual winders.

 |  IP: Logged

Joe Caruso
Film God

Posts: 4105
From: USA
Registered: Jun 2003


 - posted December 23, 2011 08:06 AM      Profile for Joe Caruso     Send New Private Message       Edit/Delete Post 
I'm not on for tight-winding, as this causes breaks - Prefer loose film on the reel and tamped down (by hand so it is even all-around, sort of feels like a smooth wave when you run your hand across - Sounds odd, but I've had no troubles doing this procedure for years - Vertical storage (save for a few), like books (you would never stack a series of 'Radio Boys' or 'Dick Kent', stories, these are collector items too), LPs and comic books, amd those Famous Monsters, well, those cherished magazines MUST be vertically aligned with backing boards and sealed - Same with films, though not as rigid - Metal cans as opposed with plastic - Shorty

 |  IP: Logged

Osi Osgood
Film God

Posts: 10204
From: Mountian Home, ID.
Registered: Jul 2005


 - posted December 23, 2011 12:19 PM      Profile for Osi Osgood   Author's Homepage     Send New Private Message       Edit/Delete Post 
Upright is my pick as a general rule!

--------------------
"All these moments will be lost in time, just like ... tears, in the rain. "

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2