8mm Forum: Help me with a question Bauer T610

This is topic Help me with a question Bauer T610 in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006793

Posted by Jeroen van Ooijen (Member # 1104) on January 15, 2012, 04:20 PM:

Hello all,

Tonight i was sync Mickey's Christmas carol on my Bauer T610.
I press the next buttons STEREO->Phono->automatic->track 1->track 2-> and record Sound mix to level 8 and manual volume as wide as possible.
There is a button on the panel track 1 0 track 2,i was put it on 0 because i thought it was stereo.
Ok i was ready to re record and everything goes fine.....BUT
i was finish the job and was checking the movie on my Elmo ST1200HD but i heard the old sound into the movie,is this normal?
What did i wrong??? [Confused]

And what is the best to do this job,really make stereo or do it in mono?
What is the best and how can i do the job in stereo?
Please let me know.

Jeroen

Posted by Winbert Hutahaean (Member # 58) on January 15, 2012, 06:12 PM:

Jeroen, in many projectors, there is a recording facility called "sound on sound" meaning you can still keep the old sound while you add new sound. The button starts from 0 to 10 where 0 means the old sound is max the new sound is 0, and vice versa goes to 10 means the new sound is 10 and the old track is 0 (= erased).

I don't know your projector but perhaps you need to check if it has "sound on sound" features.

cheers

Posted by Heinrich Kronschlaeger (Member # 145) on January 16, 2012, 02:30 AM:

Hello Jeroen,
you wrote about the botton on the panel track 1-0-2 , this is for automatic duoplay, only for playback and only for using speakers direcly connected to your T 610. You can use automatic duoplay, if you had recorded music on track 1 and spoken Text on track 2. The Bauer T 610 raises the volume of the spoken text automatically at the moment, the text is spoken. But only with the built-in speakers of the T 610 or connected speakers.
At record mode it does not matter, if you have 1, 0 or 2 at automatic duoplay.
The better recording with the T 610 is stereo and manual recording ( not automatic on the left side ) and SOUND MIX to 8 and manual record as wide as possible. ( With automatic recording at the left side it does not matter if you have manual recording at the right side at 0 or 8, this is only for manual recording ).
If you hear the old sound after finishing the job, you have a problem with your T 610.
Kind regards
Henry

UBB.classic^TM 6.3.1.2