This is topic Imac Supersound8 Manual in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007132
Posted by Benjamin George Smith (Member # 3059) on May 29, 2012, 05:13 PM:
Hello everyone!
I bought a projector recently, everything works it's just that nothing moves. The autoload also isn't moving. I've opened it up, all cables, wires and modules are intact. Motor sounds fine too.
I was hoping that someone would have a manual for this as I can't find on on this site or anywhere else on the internet. I also considered the fact that I might have to plug the speak in for it to work.
Many thanks!
Posted by Joe Taffis (Member # 4) on May 29, 2012, 06:51 PM:
It sounds like you're missing a belt; but by "cables", do you mean belts? If so, are they moving?
Posted by Benjamin George Smith (Member # 3059) on May 29, 2012, 09:27 PM:
I wasn't sure if it was possible/a good idea to run the projector without the side on. Would it be a good way to test things?
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2