8mm Forum: Imac Supersound8 Manual

»	8mm Forum » 8mm Forum » Imac Supersound8 Manual

UBBFriend: Email this page to someone!

Author

Topic: Imac Supersound8 Manual

Benjamin George Smith
Junior
Posts: 11
From: King's Lynn, Norfolk, UK
Registered: Apr 2012

posted May 29, 2012 05:13 PM

Hello everyone!

I bought a projector recently, everything works it's just that nothing moves. The autoload also isn't moving. I've opened it up, all cables, wires and modules are intact. Motor sounds fine too.

I was hoping that someone would have a manual for this as I can't find on on this site or anywhere else on the internet. I also considered the fact that I might have to plug the speak in for it to work.

Many thanks!

| IP: Logged

Joe Taffis
Phenomenal Film Handler

Posts: 1592
From: United States
Registered: Jun 2003

posted May 29, 2012 06:51 PM

It sounds like you're missing a belt; but by "cables", do you mean belts? If so, are they moving?

--------------------
Joe Taffis

| IP: Logged

Benjamin George Smith
Junior
Posts: 11
From: King's Lynn, Norfolk, UK
Registered: Apr 2012

posted May 29, 2012 09:27 PM

I wasn't sure if it was possible/a good idea to run the projector without the side on. Would it be a good way to test things?

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2