|
Author
|
Topic: Projector Parts
|
John Selph
Junior
Posts: 28
From: Metairie, LA, USA
Registered: Nov 2012
|
posted November 11, 2012 05:17 PM
Hey y'all,
Glad I found this forum. I just acquired a B&H 10ms Dual 8 projector and the Supply Reel Spindle is damaged. Is there anyplace to purchase such parts? Everything else works fine, and you can even show film, but because the supply spindle is damaged, it won't rewind the film. Could also use a manual for this machine as well. I have 20 or so 50' reels and several 400' reels of family films that I want to digitize.
Any recommendations, thoughts, and suggestions would be greatly appreciated.
Thanks,
John
--------------------
Outside of a dog, a book is a man's best friend.
Inside of a dog, it's too dark to read.
- Groucho Marx -
| IP: Logged
|
|
John Selph
Junior
Posts: 28
From: Metairie, LA, USA
Registered: Nov 2012
|
posted November 19, 2012 02:11 PM
Just a "Heads Up" to everyone, I found someone on eBay (USA) who advertises parts for various projectors. I contacted him regarding the spindle and he sold me one for $17.50 shipped. I am waiting for it to arrive to make sure it is the correct part, but I sent him a photo so hopefully it's right.
If everything is correct, and it's acceptable to post vendor info on this forum, I'll supply his information.
Thanks,
John
[ November 19, 2012, 04:53 PM: Message edited by: John Selph ]
--------------------
Outside of a dog, a book is a man's best friend.
Inside of a dog, it's too dark to read.
- Groucho Marx -
| IP: Logged
|
|
|
|
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
