8mm Forum: Eumig Mark-S 712 D

»	8mm Forum » 8mm Forum » Eumig Mark-S 712 D

UBBFriend: Email this page to someone!

Author

Topic: Eumig Mark-S 712 D

Bruce Baldwin
Junior
Posts: 1
From: South Africa
Registered: Dec 2012

posted December 16, 2012 04:30 AM

Please can anybody assist in how to change the sprockets of this projector and what it looks like as I did not get the sprockets to change it to a normal 8. I am a toolmaker by trade and can make it if provided a picture of the said component. If I can purchase the components it will be highly appreciated. Please contact me on my e-mail at bbaldwin@iburst.co.za.

| IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010

posted December 16, 2012 05:32 AM

Hi Bruce

Welcome to the forum!

Just pull the film guide down and the sprockets twist and pull off. You also need to change the film channel guide near the lens.

PatD

[ December 16, 2012, 08:52 AM: Message edited by: Pasquale DAlessio ]

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2