This is topic Request review in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008089

Posted by Antonio Leon (Member # 1611) on April 11, 2013, 02:02 PM:
 
I'm buying a dual 8 mm projector. My expectations are:
Eumig 605,
Duo 100 and
Chinon 2000GL
Since I have enough experience for the election, I ask your opinion on these three projectors.
Thank you for your attention
 
Posted by John Davis (Member # 1184) on April 11, 2013, 06:25 PM:
 
I personally don't rate any of these. But if pushed I would say the Eumig is the best of this lot.
 
Posted by Antonio Leon (Member # 1611) on April 11, 2013, 10:26 PM:
 
Thank you for your quick response. What I recommend projector, the projector is intended to digitize old films 8 mm and super 8 with EasyTransfert. I have an Elmo FP-C but I could synchronize the speed and the frame of the film.
 
Posted by John Davis (Member # 1184) on April 12, 2013, 08:42 AM:
 
I would have assumed the Elmo had a variable speed, certainly the Eumig 6series had a variety of speeds but not a variable speed control. I also think this series was not Eumig's finest hour in terms of quality of operation and projected image
The Chinon 2000GL has a variable speed but a poor lens and a flimsy gate.
I have no experience directly of the Duo but my suspicion is that this is also low end machine
 
Posted by Antonio Leon (Member # 1611) on April 13, 2013, 02:06 PM:
 
What is your opinion of the Canon P-8 CINESTAR S Dual 8MM 8 MM Movie Projector Varispeed
 
Posted by John Davis (Member # 1184) on April 14, 2013, 05:04 AM:
 
I'm not sure this one crops up too often this side of The Pond but some of the US members may be familiar with the P-8
 
Posted by Antonio Leon (Member # 1611) on April 14, 2013, 05:28 PM:
 
Well, keep waiting to find something suitable to my needs and possibilities. I want to make my transfers with Easy-Transfert, and my Elmo FP-C has been giving me tin with the adjustment of the projection, and in my area no one can give service.
The Canon P-8, I have given up because I read that is very complex in its mechanics.
What me recommend projector?
I thank you for your counsel
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2