8mm Forum: Scope Q

»	8mm Forum » 8mm Forum » Scope Q

UBBFriend: Email this page to someone!

Author

Topic: Scope Q

Moshe Yitzhak
Expert Film Handler

Posts: 211
From: Israel
Registered: Aug 2011

posted July 09, 2013 11:50 PM

I have both Elmo ST 180 and 1200.

Wanted to know if the Lens :

SANKOR ANAMORPHIC CINEMASCOPE LENS / OBJECTIV 16-D no. 51284

will fit my projector?

| IP: Logged

Akshay Nanjangud
Jedi Master Film Handler

Posts: 637
From: Dallas, TX
Registered: Nov 2011

posted July 10, 2013 12:14 AM

Obviously they don't! Sell me all your scope prints, pronto!!

I don't know Moshe. Someone else will let you know.

| IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013

posted July 10, 2013 12:52 AM

Hello, Moshe. I have a scope lens but I don't put it directly on the projector instead of the original lense but in front of it with a bracket. By the way, I went to the flea market in Jaffa but didn't see any film. But i's a nice place and will for sure go back.

--------------------
Dominique

| IP: Logged

Joe Taffis
Phenomenal Film Handler

Posts: 1592
From: United States
Registered: Jun 2003

posted July 10, 2013 06:09 AM

Moshe, the 16-D should work with an adapter. This is my 16-D scope lens with an adapter available from Wittner in Germany, and here in the U.S.A. from The Reel Image. The adapter attaches easily to the front of the Elmo projectors, and the lens slips right into the inner aluminum ring, which I think is 52 cm for the 16-D....

[IMG]http://8mmforum.film-tech.com/cgi-bin/showpic.cgi?dir=uploads0503&file=rsz _dcp_3.jpg[/IMG]

[IMG]http://8mmforum.film-tech.com/cgi-bin/showpic.cgi?dir=uploads050 3&file=rsz_dcp_5.jpg[/IMG]

--------------------
Joe Taffis

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2