8mm Forum: Technicolor Cartridge Projector Gear

»	8mm Forum » 8mm Forum » Technicolor Cartridge Projector Gear

UBBFriend: Email this page to someone!

Author

Topic: Technicolor Cartridge Projector Gear

Steven J Calandra
Junior
Posts: 1
From: New Milford, NJ, USA
Registered: Jul 2013

posted July 29, 2013 12:41 PM

Guys I have two 1000 BX Projectors that were used in General Motors Car dealrships in the 1970's. The shutter gear is stripped on one side. because it's made of soft plastic.
Do you know how I could get a replacement?
Or someone with a New 3D printer that can make one out of plastic, and possibly make a supply to other enthusiasts with the same machines. [Big Grin]

--------------------
Steve Calandra. New Jersey

| IP: Logged

Frank Harer
Junior
Posts: 2
From: Tacoma, WA, USA
Registered: Aug 2017

posted January 06, 2019 08:13 PM

Hey Steven, did you ever luck out with a new cam gear assembly for the projector? I just fired mine up after a complete restoration (but with the original cam gear assembly), and the metal shutter gear took off every tooth of the dang cam gear. It's so frustrating to have such a great projector that can't do anything! [Confused]

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2