Jay Hunt
Junior
Posts: 1
From: Ottawa, ON, Canada
Registered: Jun 2014
|
posted June 19, 2014 11:34 AM
I have a vintage Keystone K112 standard 8mm projector I use for film transfers. It was working fine until yesterday when all of a sudden in the middle of a film transfer the ratchet that pulls the film past the aperture began working backward, pulling up instead of down. I have a lot of films to transfer so I either need to get it fixed or buy another used one in good working condition, whichever is the most economical approach.
Can any of you be of assistance?
--------------------
Jay Hunt
Ottawa Canada
| IP: Logged
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
