8mm Forum: Eumig 605d focus issue

»	8mm Forum » 8mm Forum » Eumig 605d focus issue

UBBFriend: Email this page to someone!

Author

Topic: Eumig 605d focus issue

Hugh Burch
Junior
Posts: 4
From: Cheltenham, UK
Registered: Jul 2014

posted September 03, 2014 08:52 AM

Hey,
I have an issue with a Eumig 605d projector. While playing std 8 it focuses fine but when i try to view super8 it will only focus on one side. I have had a bit of an investigate and have found that 2 small screws on the removeable gate can be adjusted to alter the way it focuses but to get it to focus properly seems impossible.
Am i snooping in the right area here or am i missing something?
any help or advice would be greatly appreciated.
Hugh

| IP: Logged

Erik Snel
Junior
Posts: 30
From: Leiden, South Holland, the Netherlands
Registered: Nov 2013

posted December 07, 2014 02:10 PM

when this happens it means someone adjusted the front part of the gate (the lens holder) wrong. there are four screws and the position of your lens is very important to the position of the film. maybe you bumped it into something hence bending it in someway or someone has been screwing around literaly.

--------------------
Erik Snel Eumig Expert
ES Filmtechniek

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2