8mm Forum: Bell & Howel 256 Spindle Arms putting back together Help

»	8mm Forum » 8mm Forum » Bell & Howel 256 Spindle Arms putting back together Help

UBBFriend: Email this page to someone!

Author

Topic: Bell & Howel 256 Spindle Arms putting back together Help

Phil Mitchell
Expert Film Handler

Posts: 144
From: Melbourne, Australia
Registered: Aug 2013

posted October 29, 2014 03:16 AM

Howdy all, trust all are well.

I had to replace the spindles on my Bell & Howell 256, thanks to guy in USA on EBay who sells them from Tobin Cinema I think some on here know him or of him, (Great E-Bayer, he included very detailed instructions on how to put spindles on and how to calibrate them), why they had a plastic screws as original, sheesh, I was wondering why reel that had bulk of film on it, was wobbling. I tried to tighten plastic screws on original ones and of course they broke being so old.
Anyway one issue, my brother by mistake ( he thought he was doing right thing) took spindle arm covers off, now I am trying to work out how the top sprocket cog wheel and the two washers and what I believe is called a Wave Washer go back on.

I can get them back on and spindle and cover without the wave washer, but no good of course as wave washer required.

Anyone had to do this on a B& H 256 or similar?

Hopefully someone has suggestion, Thanks again for support.
Phil

| IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003

posted October 29, 2014 09:09 AM

I have had these replaced the nylon screws have a torque setting yours broke because you may have put to much tension on them.

--------------------
jim schrader
"Let's see “do I have that title already?"

| IP: Logged

Phil Mitchell
Expert Film Handler

Posts: 144
From: Melbourne, Australia
Registered: Aug 2013

posted October 29, 2014 09:56 PM

thanks for reply Jim,

Only had projector a little while and reel sizes I have played are only 200feet, no idea of course what previous owner played on it.

Have you ever had to take of reel arms covers?

Cheers
Phil

| IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003

posted October 30, 2014 11:11 AM

Only the covers to see how they worked but never the spindles I had a repair shop do that.

--------------------
jim schrader
"Let's see “do I have that title already?"

| IP: Logged

Phil Mitchell
Expert Film Handler

Posts: 144
From: Melbourne, Australia
Registered: Aug 2013

posted October 31, 2014 02:40 AM

Thanks Jim,
In case others ever need to know, I worked it out.

On each spindle doesn't matter which order the washers go including the wave one ( the bent looking one) I put the cog wheel after one washer so it aligns with other cog wheels on arms.
Then put spindle into arm and put space and then screw and washer to tighten up other side and then calibate it.
Just make sure spacer is lined up okay before you really tighten scerws.

Cheers
Phil

| IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003

posted May 11, 2015 01:17 PM

Phil where did you get replacement screws?

--------------------
jim schrader
"Let's see “do I have that title already?"

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2