8mm Forum: Help with a Eumig Mark S 710D

»	8mm Forum » 8mm Forum » Help with a Eumig Mark S 710D

UBBFriend: Email this page to someone!

Author

Topic: Help with a Eumig Mark S 710D

Mark Mander
Phenomenal Film Handler

Posts: 1236
From: Dunstable ,Bedfordshire.
Registered: Jan 2005

posted April 18, 2015 12:28 PM

Can anyone help with this please,I've just got a Eumig 710d and wondered if it's complete to change from Super 8 to Std 8,i have the sprockets but do you change the gate? It runs fine with Super 8 but std 8 the picture rolls on screen and seems like the loop is lost,Thanks Mark.

--------------------
Elmo GS1200 1.0 lens
Elmo ST1200HD 1.1 lens
Sankyo 800 1.0 lens
Elmo 16CL
Elf NT1

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted April 18, 2015 12:37 PM

Mark
The spare gate lives in a slot just above the lamp.

--------------------
Maurice

| IP: Logged

Mark Mander
Phenomenal Film Handler

Posts: 1236
From: Dunstable ,Bedfordshire.
Registered: Jan 2005

posted April 18, 2015 12:59 PM

Thanks Maurice,Found it and will give it a try,Mark.

Just ran a film and sorted,Thanks again,Mark.

--------------------
Elmo GS1200 1.0 lens
Elmo ST1200HD 1.1 lens
Sankyo 800 1.0 lens
Elmo 16CL
Elf NT1

| IP: Logged

Heidi Barker
Film Handler

Posts: 57
From: Preston, Lancashire, UK
Registered: Nov 2017

posted December 16, 2017 01:35 PM

sorry to resurrect an old thread but i have just bought one of these projectors and i can't get it to thread the film through - i have no manual for it - i don't suppose you have a manual and could photograph the threading instructions? i think something may be broken on it but i'm not sure. there's a bit under the lens that pushes together but i don't know what it does!
thanks

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted December 16, 2017 01:46 PM

Heidi
This forum has manuals for down-loading. They do not have one for your projector, but they do have one for the Eumig S810 series projectors.
This will probably give you the details that you want.
http://www.film-tech.com/warehouse/index.php?category=2#8mm Projectors
By the way, the lever under the gate is the threading lever. By holding this down it sets the projector for threading. Start to run, hold down lever, whilst holding insert the film in the slot and it will take it from there.

--------------------
Maurice

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2