8mm Forum: Fumeo 9119 no audio..where to start trouble shoot

»	8mm Forum » 8mm Forum » Fumeo 9119 no audio..where to start trouble shoot

UBBFriend: Email this page to someone!

Author

Topic: Fumeo 9119 no audio..where to start trouble shoot

Alan Gouger
Master Film Handler

Posts: 451
From: Florida
Registered: Jun 2003

posted December 14, 2015 09:38 PM

I just received another Fumeo 9119. Everything works but no audio.
First thing I did was to check the fuses and they are fine. All audio settings are as they should be ( I have a few of these so I am very familiar with the machine )
When I turn on the audio amplifier there is no audio hiss and you do not hear it powering up, no hum, nothing it is dead silent. I do not know where to start beyond this point. Appreciate any pointers. Thanks in advance.

| IP: Logged

Josef Grassmann
Expert Film Handler

Posts: 190
From: Hennef-Sieg, Germany
Registered: Apr 2005

posted December 26, 2015 11:55 AM

Hello,
do you know what amp is built in? Standard was 25W, but 30W also used?
Have you measured contacts of amp on-off switch?
Is 1.5A fuse really intact?
Have you measured 35 Volts at circuit board in?
Is pilot light on?

merry x-mas
Josef

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2