8mm Forum: Fumeo 9139 Fumeo

»	8mm Forum » 8mm Forum » Fumeo 9139 Fumeo

UBBFriend: Email this page to someone!

Author

Topic: Fumeo 9139 Fumeo

Is Hoogland
Junior
Posts: 2
From: Arnhem, Netherlands
Registered: Nov 2017

posted November 09, 2017 03:37 AM

Hi there
I have a Fumeo 9139 xenon super 8 projector
There is a problem with the extended power supply
In order to repair the Fumeo i need a scheme of the Powersupply
Does anyone knows where to get it?
Thanks in advance

--------------------
Is Hoogland

| IP: Logged

Renzo Dal Bo
Film Handler

Posts: 70
From: Mogliano Veneto, Italy
Registered: Dec 2016

posted November 09, 2017 11:45 AM

Hi

many power supplies for Fumeo projectors (especially xenon 16mm) were built by IREM, an italian firm from Turin, still existing. Maybe they can help, if you contact them.

Renzo

| IP: Logged

Jose Artiles
Master Film Handler

Posts: 357
From: Spain
Registered: Oct 2005

posted November 09, 2017 12:37 PM

If IREM cant help you try cineteccnica Marino,they are profesional and repair fumeo´s

http://www.cinetecnicamarino.com

--------------------
As Steven Spielberg says....
Nothing beats old school projection. Digital is just an imitation.

| IP: Logged

Is Hoogland
Junior
Posts: 2
From: Arnhem, Netherlands
Registered: Nov 2017

posted November 15, 2017 07:34 AM

Thanks for your reply's

My Italian is very poor, I hope Marino understand the question and can help

Ciao

--------------------
Is Hoogland

| IP: Logged

Josef Grassmann
Expert Film Handler

Posts: 190
From: Hennef-Sieg, Germany
Registered: Apr 2005

posted February 28, 2018 03:18 PM

@ Is Hoogland
I tried to send you an answer to your private massage.
But I was unable to do it.
There comes following massage on screen"Sorry, you can not reply to this private message until the recipient replies."

Therefore my reply appears here:
Hello,
sorry for late response. I don´t have a mobile telefon, and don´t have access to www at home. I have to visit a friend about 6km away in order to have access to www.
Now to your question:
I am quiete shure, that we can repair all fumeo power supplies, preamps, power-amps. As we have many years of experiance in carry out repair on almost all brands of film projectors 8mm, S8, 9.5mm,16mm and S16, 35mm and 70mm. In addition we repair many slide projectors including xenon types.
We have no power supply as spare available, but we have spare parts for repair of those circuits.

Best regards
Josef

Further problem to send you this massage here in forum:"Sorry, we can not process your request. The board administrator has enabled flood protection for this function. You must wait at least 30 seconds before trying this request again.

Note: Using your back button to return to the previous page may cause the data you were attempting to submit to be lost. Instead, you should use your browser's reload button when the time period has elapsed.

» Please use your browser's back button to return. "

| IP: Logged

Phil Murat
Jedi Master Film Handler

Posts: 671
From: Villeneuve St Georges, France
Registered: Dec 2015

posted March 01, 2018 01:53 AM

Hi Is,

Assuming Lamp is Ok, Check if there is a "power relay" inside Lamp Power Supply.

If yes, there is a high probability relay is faulty.
If power supply is properly designed, relay should be installed on "fast disconnect" support.

As possible, post a picture with relay reference showed.

Hope this help

| IP: Logged

Josef Grassmann
Expert Film Handler

Posts: 190
From: Hennef-Sieg, Germany
Registered: Apr 2005

posted March 08, 2018 03:22 PM

Fumeo did employ several powwer supplies for 9139 projectors.
e.g. 9515 - 9549 or 9559 or PE300
About which one we are talking?

Josef

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2