This is topic Bauer Speaker connector plates break often. Solutions? in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011883
Posted by Edwin van Eck (Member # 4690) on November 15, 2017, 07:45 AM:
 
Hi,

We very frequently have issues with the messing plates in the Bauer studioline series (Bauer T502, T510, T610, etc, etc).
These tend to break when you open the back cover often (e.g. for maintenance).

Is this part available? Or does someone recommend a solution?
Anyone on this forum with similar problems?

-

-
 
Posted by David Roberts (Member # 197) on November 15, 2017, 11:58 AM:
 
hi Edwin,
these have come off the circuit board on mine,but have not broken as such,so ive just re-soldered them back on.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2