Jake Mayes
Expert Film Handler
Posts: 119
From: Bath, UK
Registered: Sep 2012
|
posted December 12, 2017 05:23 PM
I develop all my own films at home such as E6, still negatives, RA4 and prints (UK) and am starting to process ECN-2 with good success. (If only i could print them myself ![[Frown]](frown.gif) )
Is there likely to be any demand for ECN-2 processing from folks here at £12.00 a roll to process?
As i can have two films in the tank at any one time, i would gladly use spare chemicals to process the film of others, as i have to mix up a certain batch and would likely not use them to their end before i need to mix a new batch as i like to develop all films shortly after mixing for consistent results.
I am not offering the service yet, but i aim to on my etsy shop at some point which I am setting up. I am curious as to interest. I have developed my own E6 and C41 and B&W for an age, only makes sense to do my own ECN-2.
I am looking to gauge interest before offering such as a service in the UK as an alternative to a few others.
| IP: Logged
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
