8mm Forum: Case for Bolex H8 Rex4

»	8mm Forum » 8mm Forum » Case for Bolex H8 Rex4

UBBFriend: Email this page to someone!

Author

Topic: Case for Bolex H8 Rex4

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted January 12, 2018 05:33 AM

Hello, I have a Bolex H8 Rex 4 and I would have liked to have an original Bolex bag or case, so I bought an H-1 version of Bolex bags, convinced that it was good for the whole series H : http://www.bolexcollector.com/accessories/case50.html
Unfortunately it is not suitable for my Rex 4, it does not come in because the camera have the base, instead this model of case is made for the old H series without the base.
Do you know the right bag models for a Rex 4?
Thank you.

| IP: Logged

Bryan Chernick
Jedi Master Film Handler

Posts: 654
From: Bothell, WA, USA
Registered: Mar 2010

posted January 13, 2018 12:13 AM

This is the case I have. It's quite a bit smaller than the one I have for my non-reflex H8. The camera fits in it properly.

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted January 13, 2018 04:49 PM

It's very similar to the one I have, but I see some difference that allows even the most recent Rex to fit.
Could you take a picture without a camera in it?
Thank you! [Smile]

| IP: Logged

Bryan Chernick
Jedi Master Film Handler

Posts: 654
From: Bothell, WA, USA
Registered: Mar 2010

posted January 14, 2018 02:37 PM

Here it is without the camera.

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted January 14, 2018 05:12 PM

Thanks, Bryan.
It have the part for the base of camera more wide, compared to the one I have. It has a piece in vertical instead of horizontal, to let a Rex-4 comfortably enter (I see that yours is also a Rex4!).

Only thing: I see that the camera in bag is slightly crooked, is it for the rubber eyepiece pressures, it pushes camera a bit?
When are you carrying the camera are stable? The lid close properly?
Thank you. [Smile]

| IP: Logged

Bryan Chernick
Jedi Master Film Handler

Posts: 654
From: Bothell, WA, USA
Registered: Mar 2010

posted January 14, 2018 11:05 PM

The eye cup does push it forward a bit but it fits nice and snug and the lid closes properly.

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted January 16, 2018 02:12 PM

Thanks, Bryan.
I found it, at a ridiculous price, one bag like yours.
For those interested, I place two photos with the differences between two bags.

Here's the bag that I have (and I'm trying to sell). Note the piece in place of camera base, it's horizontal, and it does not allow the insertion of a more recent Bolex, with a wide base.

Here is what I found, like yours.

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted January 23, 2018 03:44 PM

Bryan, a curiosity about this case.
I saw that in your case the piece circle in green in photo is missing, but there is the "sign", as if it had been there before. I don't know if disassembled you the piece, but I answer myself on why: that piece goes against the Rexofader (not provided when the suitcase was produced) and you have to remove it, otherwise the case doesn't close well.
However, now I have the case like you, all right, except for the fact say. [Smile]

| IP: Logged

Bryan Chernick
Jedi Master Film Handler

Posts: 654
From: Bothell, WA, USA
Registered: Mar 2010

posted January 23, 2018 11:45 PM

I don’t remember removing that piece but I may have, I’ve had that case for several years now. It does fit well with the Rexofader and the lid closes properly.

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted January 24, 2018 05:45 AM

Thanks, Bryan.
Do you have a little key for your lock of case?

In my case there is a different method of opening: you move a "lever" and the lock can snap, without the need for a key.

| IP: Logged

Bryan Chernick
Jedi Master Film Handler

Posts: 654
From: Bothell, WA, USA
Registered: Mar 2010

posted January 28, 2018 01:38 PM

I have a key but never use it. It’s a very simple key, the lock can be easily picked with a bent paper clip.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2