8mm Forum: Eumig 940

»	8mm Forum » 8mm Forum » Eumig 940

UBBFriend: Email this page to someone!

Author

Topic: Eumig 940

Stuart Hilliker
Film Handler

Posts: 79
From: London
Registered: Dec 2006

posted May 19, 2018 07:20 AM

I’m looking for four fader caps to replace those missing from my Eumig 940.
Does anyone have any spares?
Thanks

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted May 19, 2018 07:23 AM

If anybody can define the capacitances, types and voltages of the caps, they can probably be bought new. (Eumig often put schematics in their manuals.)

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

Stuart Hilliker
Film Handler

Posts: 79
From: London
Registered: Dec 2006

posted May 19, 2018 07:28 AM

Sorry Steve. I should have been clearer. It’s the plastic tops of the faders I’m looking for, not capacitors for a change! They appear to snap off very easily.

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted May 19, 2018 07:33 AM

Sorry!

-you say "cap" around an electronics guy and it gets the Microfarads happening! [Big Grin]

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted May 19, 2018 07:55 AM

A project for Edwin perhaps?

--------------------
Maurice

| IP: Logged

Martin Dew
Expert Film Handler

Posts: 204
From: Henley-on-Thames, UK
Registered: Jan 2017

posted May 21, 2018 05:27 PM

I know where you can get some slider caps, Stuart. PM if you're interested in the manual too.

| IP: Logged

Stuart Hilliker
Film Handler

Posts: 79
From: London
Registered: Dec 2006

posted May 22, 2018 12:36 AM

Thanks Martin. Have sent you an email.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2