8mm Forum: Eumig Mark S query

»	8mm Forum » 8mm Forum » Eumig Mark S query

UBBFriend: Email this page to someone!

Author

Topic: Eumig Mark S query

Colin Parkinson
Junior
Posts: 8
From: Halifax, UK
Registered: Jun 2018

posted June 15, 2018 03:12 PM

Hi guys i am new to this! I have picked up a Eumig Mark S which needs new motor bearings which I have ordered from Van Eck.

Has anyone got instructions on how to remove the motor so I can change them?

Many thanks

Colin

| IP: Logged

Maurizio Di Cintio
Jedi Master Film Handler

Posts: 977
From: Ortona, Italy
Registered: Jan 2004

posted June 15, 2018 05:39 PM

Van Eck should be able to provide you with all necessary info...

--------------------
Maurizio

| IP: Logged

John Last
Expert Film Handler

Posts: 104
From: Codsall, UK
Registered: Dec 2012

posted June 19, 2018 01:47 PM

If you buy the workshop manual for this projector from Old Timer full details are given on how to set up the motor and all other parts too.

| IP: Logged

Colin Parkinson
Junior
Posts: 8
From: Halifax, UK
Registered: Jun 2018

posted June 19, 2018 03:16 PM

Thanks John, how do I find Old Timer?

Colin

| IP: Logged

Colin Parkinson
Junior
Posts: 8
From: Halifax, UK
Registered: Jun 2018

posted June 23, 2018 12:04 PM

I have removed the amplifier and transformer, and managed to change the bearings.

Not that difficult, just a bit of a fiddle......

Colin

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2