This is topic Lomo cutter splitter in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012509
Posted by Luigi Castellitto (Member # 3759) on September 17, 2018, 06:53 PM:
I have this Lomo cutter for 2x8 film (photo taken from the internet).
Should I cut a developed DS8 film, do you know if it's all right also for it?
I have no DS8 don't cut for a trial.
Posted by Brian Fretwell (Member # 4302) on September 18, 2018, 09:08 AM:
It was sold with the Lomo developing tank for splitting home developed standard 8 film. the one I had was slightly inaccurate and one half was slightly wider than the other when slit.
Posted by Luigi Castellitto (Member # 3759) on September 18, 2018, 09:59 AM:
And would it be good for DS8 too?
Posted by Renzo Dal Bo (Member # 5688) on September 18, 2018, 11:22 AM:
I can confirm that it can be used to split DS8 films, if it properly works.
Renzo
Posted by Luigi Castellitto (Member # 3759) on September 18, 2018, 11:51 AM:
Thank you, Renzo.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2