Posts: 534
From: Gold Coast. Australia
Registered: Jan 2005
posted February 22, 2019 12:42 AM
Hi to the members and especially to Leon Norris.
I have got a nice faulty Elmo GS 1200 that I must repair. Hope some one can help as I can't go any further now.
The plastic gears that drive both front and back arms have cracked. These are the plastic gears driven by the take up motor and rewind motor plastic gears. They both have a one way clutch in the centre to ensure they drive the input shafts in only one direction.
So as these 2 plastic gears are broken and I have no spares, I need advice on where to get replacements.
Hope you can help with advice Leon or any member that knows about these pesky plastic drive gears.
Regards to all.
dogtor frankarnstein
[ February 22, 2019, 04:25 AM: Message edited by: frank arnstein ]
-------------------- At Projector Heaven the Focus is always on Detail.
Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012
posted February 22, 2019 12:55 PM
Hi frank, yes they do go! I have them in stock ! And the arm pulleys are different! One has a gear made behind it. And the other does not! If you need any thing let me know! Good luck! Leon.
Posts: 534
From: Gold Coast. Australia
Registered: Jan 2005
posted May 22, 2019 10:11 PM
Hi Edwin,
I am very happy with the two GS-1200 arm drive gears you recently sent me. They were quite easy to fit and are performing well.
Also happy with the replacement Elmo K-100 delivery arm spindle, the K-110 delivery spindle and the Eumig 810d delivery spindle Super 8 Collar you sent.
The Eumig 900 worm gears and the Eumig 926 sound head pressure pad locking clips also are very good.
I will be buying more parts in the future from you as needed.
Thanks for the great service Edwin,
Dogtor Frankarnstein
-------------------- At Projector Heaven the Focus is always on Detail.