8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Colossus of Rhodes, flipper film

 - UBBFriend: Email this page to someone!    
Author Topic: Colossus of Rhodes, flipper film
Pierre Mdihi
Film Handler

Posts: 86
From: Strasbourg, France
Registered: Jan 2019


 - posted April 01, 2019 05:11 AM      Profile for Pierre Mdihi     Send New Private Message       Edit/Delete Post 
Hi,

Recently i purchase some film in french on 30cm diameter reel (350m?) that include flipper the dolphin, qai des orfèvre (complete on 2 reel, +600M) and Colossus of Rhodes (a Sergio leon movie).

I have the problem that this reel are too big for my projector, so i have 2 question about the lenght on the flipper movie and Colossus of Rhodes. Do you have somme idear have long are this movie?

Flipper is in one reel with some cartoon and Colossus of Rhodes is on one reel with a documentary.

And in all box the owner put a small bag who suck moisture (the same one you can found wenn you buy clothe), do i need to remove them or it's good for the film conservation.

Pierre

 |  IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013


 - posted April 01, 2019 11:48 AM      Profile for Dominique De Bast   Email Dominique De Bast   Send New Private Message       Edit/Delete Post 
Hello Pierre.

A 31 cm spool is Indeed a 360 mt one. There are some spools with the same diameter that have a 420 mt capacity (the center is smaller than on other spools) but they are not common.

Flipper is probably a 60 mt cartoon (example : https://www.bd-cine.com/fiche.php?id=2981) or a 250 mt digest of the tv serie (https://www.bd-cine.com/fiche.php?id=8787).

Four extracts from Colossus of Rhodes seem to have been released, so it dépends on what you have.

I'm happy to see that you now also like pré-'80s films :-)

Quai des Orfèvres is a 670 mt release.

 -

I personnally don't put silica gel bags on the film boxes but I don't know if I'm right or wrong.

Do you have rewind arms and a splicer ?

--------------------
Dominique

 |  IP: Logged

Pierre Mdihi
Film Handler

Posts: 86
From: Strasbourg, France
Registered: Jan 2019


 - posted April 01, 2019 05:29 PM      Profile for Pierre Mdihi     Send New Private Message       Edit/Delete Post 
I like all kind of movie but a slight preference for the 90th and after maybe the nostalgia.
The owner don't know because it's was a inheritance. I was hoping it was a digest because i prefere to says a resume of a film than just a part, it's less frustrating.

Sorry i don't have a rewind arms or even a viewer but i have splicer.
the silica bag makes me perplex maybe i will remove them and replace them by news paper, a colectioneur said to me it was good to preserve the film from humidity.

Your are lucky, it's always very nice to have the box.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2