8mm Forum: Eumig Mark S 710D motor

»	8mm Forum » 8mm Forum » Eumig Mark S 710D motor

UBBFriend: Email this page to someone!

Author

Topic: Eumig Mark S 710D motor

Ian Smith
Junior
Posts: 1
From: George, WC, South Africa
Registered: Apr 2019

posted April 11, 2019 08:36 AM

I recently purchased a projector in dubious quality and have ended up with a dud. The thermal fuse had been bypassed and the transformer has burnt out. The have powered the lamp and sound boards separately from battery power and they both work. The motor seems OK but with the burnt out transformer I cannot test it. Does anyone know what the power requirements are for the motor so that I can power it directly. I have a single spool of film that I would like to watch but so far no projector to run it on.
Failing that does anyone have a repair manual that may show the wiring and voltages of the projector

--------------------
Ian Smith

| IP: Logged

John Capazzo
Master Film Handler

Posts: 421
From: Hillside, NJ USA
Registered: Jan 2004

posted April 18, 2019 10:51 PM

Ian, when I was in Durban, I came across a second hand shop that had a Eumig 807D. I didn't want it because I had two 810D. It worked. Maybe it's still there.

--------------------
"the image is about 30 feet ahead of us."

| IP: Logged

John Keleshian
Junior
Posts: 9
From: Andover, MA, USA
Registered: Apr 2019

posted April 20, 2019 05:19 PM

I have a lot of Eumig parts and doner machines also service info I can check on Monday, off hand I think the motor is line voltage

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2