8mm Forum: Advice on epoxy for B&H 456 projector rubber drive roller

»	8mm Forum » 8mm Forum » Advice on epoxy for B&H 456 projector rubber drive roller

UBBFriend: Email this page to someone!

Author

Topic: Advice on epoxy for B&H 456 projector rubber drive roller

Norman Hixenbaugh
Junior
Posts: 24
From: Tulsa, OK
Registered: Apr 2009

posted April 22, 2019 12:14 PM

I peeled the worn rubber upper drive roller off the upper metal pulley of my B&H 456A projector and noticed than it is affixed by some sort of epoxy.

I noticed this as the replacement stays on fine in forward motion, but starts to spin off the pulley when in reverse motion.

Any advice on a reliable epoxy I can use to bond the rubber drive roller to the metal pulley on my B&H 456A projector?

| IP: Logged

John Keleshian
Junior
Posts: 9
From: Andover, MA, USA
Registered: Apr 2019

posted April 22, 2019 02:11 PM

clean rubber and shaft and use contact cement that's what B&H used we were authorized service center for 45 years

| IP: Logged

Norman Hixenbaugh
Junior
Posts: 24
From: Tulsa, OK
Registered: Apr 2009

posted April 22, 2019 02:44 PM

What kind/brand of contact cement would you recommend? I have Super Glue Fix-All Adhesive. Says it works on rubber, wood, and metal.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2