This is topic Sound Capture from YELCO 600 in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=013001
Posted by Israel Master (Member # 7018) on July 02, 2019, 03:29 PM:
What kind of cable/equipment I need to connect YELCO 600 to a desktop computer to capture the sound track? Where to connect the cable on YELCO 600 and where to connect the cable on the computer?
I use the PowerDirector editing software with various capturing capabilities.
Posted by Barry Fritz (Member # 1865) on July 02, 2019, 04:22 PM:
It depends on what type of audio out connection you have on the projector. What type of connection is it?
Posted by Janice Glesser (Member # 2758) on July 02, 2019, 09:15 PM:
I don't record directly to my PC...but rather use a digital recorder. I connect the LINE OUT jack (not the external speaker) on the projector to the IN jack on my digital recorder. I set the recorder to record the mono signal onto both the left and right channels. I plug in earphones to the recorder to monitor the audio. The recorder records the file to a SSD card, but I usually just connect the recorder directly to my computer via an USB cable and copy the file to my computer.
Posted by Israel Master (Member # 7018) on July 08, 2019, 06:03 PM:
Hello Janice and Barry,
Finally I got yesterday the YELCO DS-607M.
The audio capture is very simple.
I connected 3.5 mm cable from the YELCO line out to the PC line in.
I capture the sound with the Power Director editing software.
Posted by Janice Glesser (Member # 2758) on July 08, 2019, 11:18 PM:
Glad it worked out easily for you Israel!
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2