8mm Forum: Elmo GS-800 and SC-30 Mag/OP buttons

»	8mm Forum » 8mm Forum » Elmo GS-800 and SC-30 Mag/OP buttons

UBBFriend: Email this page to someone!

Author

Topic: Elmo GS-800 and SC-30 Mag/OP buttons

Robert Saraceno
Film Handler

Posts: 32
From: Endicott, NY, USA
Registered: Aug 2014

posted August 01, 2019 11:09 PM

Hi everybody, I broke a switch on my Elmo SC-30 and I'm looking for any advice on how to replace it. I was wondering if anyone had any information about the types of switches that in these 2 projectors that switch the source from Mag to Optical.

I looked inside the projector and the three switches on the front of the projector look liked 3 normal push button momentary switches - 1 for Mag soundtracks - which is the broken one and is stuck on, another for PA for use with a microphone., and then a switch for optical soundtracks. I'm assuming the GS-800 has the same kind of switches - but I have a GS-1200 not an 800.

I've seen quite a few in just a short google search that resemble this one (spring loaded, push button micro switch) but I'm not sure how many pins it has or what the electrical specifics. Here's some photos from inside and outside.

Thanks in advance

| IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012

posted August 10, 2019 10:00 AM

Robert, I will check and see if I have what you need! I do have lots of Elmo super 8 parts in stock! I will let know! Leon.

| IP: Logged

Robert Saraceno
Film Handler

Posts: 32
From: Endicott, NY, USA
Registered: Aug 2014

posted August 13, 2019 08:15 PM

Thank you Leon, I really appreciate it.

| IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012

posted August 23, 2019 09:51 AM

Sorry Robert! No luck on these buttons! I don't have any of these! Good luck! Leon.

| IP: Logged

Robert Saraceno
Film Handler

Posts: 32
From: Endicott, NY, USA
Registered: Aug 2014

posted August 26, 2019 01:50 PM

No problem Leon, thanks for looking for me anyway.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2