This is topic Elmo GS-800 and SC-30 Mag/OP buttons in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=013039

Posted by Robert Saraceno (Member # 4422) on August 01, 2019, 11:09 PM:
 
Hi everybody, I broke a switch on my Elmo SC-30 and I'm looking for any advice on how to replace it. I was wondering if anyone had any information about the types of switches that in these 2 projectors that switch the source from Mag to Optical.

I looked inside the projector and the three switches on the front of the projector look liked 3 normal push button momentary switches - 1 for Mag soundtracks - which is the broken one and is stuck on, another for PA for use with a microphone., and then a switch for optical soundtracks. I'm assuming the GS-800 has the same kind of switches - but I have a GS-1200 not an 800.

I've seen quite a few in just a short google search that resemble this one (spring loaded, push button micro switch) but I'm not sure how many pins it has or what the electrical specifics. Here's some photos from inside and outside.

Thanks in advance

 -

 -
 
Posted by Leon Norris (Member # 3151) on August 10, 2019, 10:00 AM:
 
Robert, I will check and see if I have what you need! I do have lots of Elmo super 8 parts in stock! I will let know! Leon.
 
Posted by Robert Saraceno (Member # 4422) on August 13, 2019, 08:15 PM:
 
Thank you Leon, I really appreciate it.
 
Posted by Leon Norris (Member # 3151) on August 23, 2019, 09:51 AM:
 
Sorry Robert! No luck on these buttons! I don't have any of these! Good luck! Leon.
 
Posted by Robert Saraceno (Member # 4422) on August 26, 2019, 01:50 PM:
 
No problem Leon, thanks for looking for me anyway.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2