This is topic Keystone Projector Help in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=013042
Posted by Brad Kimball (Member # 5) on August 04, 2019, 10:38 AM:
How does one open the back of a K-106? There are no screws to be found that I can see. A cunundrum.
Posted by Janice Glesser (Member # 2758) on August 04, 2019, 02:10 PM:
Hi Brad. I am not familiar with that model projector, however sometimes removing the case is not that straightforward. Just a thought - Check the underside of the projector. I have seen in some projectors that you have to remove the feet to slide the casing off.
Posted by Richard C Patchett (Member # 974) on August 04, 2019, 03:16 PM:
Greetings Brad
Its been a while since i work on one if im not mistaken there are small hex nuts on the front of the projector Remove them
Then lift out the front from the case
I hope this helps
RC
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2