This is topic Elmo 1200D/HD drive rubbers in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000295

Posted by Tom Photiou (Member # 130) on April 16, 2006, 05:59 AM:
 
selling pairs,(1 of each,24 and 18fp)clutch rubber wheels.
These are in stock and are £14.00 per pair +£2.00 recorded P+P.
The proto type was sent to Mr Bill Parson and the report back to me was excellent.
To see an image of the items see the seperate forum posting under the title surprise.
 
Posted by Andrew Wilson (Member # 538) on April 16, 2006, 08:32 AM:
 
ive theGS1200;and you have emailed me to tell me that the st1200 and the gs1200 have a diffent set up reguarding the 18 & 24fps rubber wheels speed control.im such a fool for thinking they both have same layout.andy.
 
Posted by Tom Photiou (Member # 130) on April 16, 2006, 10:47 AM:
 
Not at all Andy,
 
Posted by Kevin Clark (Member # 211) on April 16, 2006, 01:30 PM:
 
This is excellent news, well done Tom, please check your email for my order.
Kevin.
 
Posted by Andrew Wilson (Member # 538) on April 16, 2006, 01:32 PM:
 
ive just had a look thru the GS1200 service manual and i have come to this deciesion.LEAVE IT TO THE EXPERTS!.i think ill do that.andy
 
Posted by Tom Photiou (Member # 130) on April 23, 2006, 12:56 PM:
 
Hi Andrew, how did you get on with your GS?

Did you still require me to hold a set of rubbers for you, i wasnt sure if you also had an ST or not. [Confused]
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2