8mm Forum: FREE SILENT GOODS AVAILABLE

This is topic FREE SILENT GOODS AVAILABLE in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000594

Posted by Chip Gelmini (Member # 44) on May 05, 2008, 12:23 PM:

Items are free for parts and/or repair just pay shipping only.

Several Bell and Howell daul 8mm machines (projectors) some are missing parts - as bought by me through Ebay (i.e. powers on works ok have no film to test). These arrived basically DOA.

Anybody looking for parts should contact me. If no takers they're going to the dump but I will destroy them anyways so that dump scavangers can't do to someone else what they did to me.

Contact: chipgelmini@yahoo.com

May 15th they go to the dump act now before it's too late!

CG

Posted by Douglas Meltzer (Member # 28) on May 05, 2008, 04:17 PM:

Projectors on Death Row!

Posted by Kevin Faulkner (Member # 6) on May 06, 2008, 06:33 PM:

What no takers [Frown]

Does no one want parts for their own machines.
Looks like it's blindfolds on and off to the gallows [Eek!]

Kev.

Posted by Dan Lail (Member # 18) on May 06, 2008, 08:29 PM:

Thus, they will die a silent death! [Razz]

Posted by Chip Gelmini (Member # 44) on May 06, 2008, 11:55 PM:

Gosh blime me. Why is it when ever I read one of Kevin's comments, I do it with a British accent? [Big Grin]

Posted by Jan Bister (Member # 332) on May 07, 2008, 08:36 AM:

ROTFL @ Dan's comment... let's just hope Chip keeps his bloody mess in black-and-white! [Big Grin]

Posted by Osi Osgood (Member # 424) on May 07, 2008, 06:02 PM:

Chip,

Are any of these older model Eumig's?

I ask becauwe one of my Eumig optical sound Super 8's is a Eumig Mark S, with a broken claw arm and by Gawd, if I can get a good used claw arm on that projector, then I'm back in business, with a very good Eumig back in service!

Posted by Chip Gelmini (Member # 44) on May 07, 2008, 08:40 PM:

Hi Osi

As my post above says, they are Bell & Howell machines only. You are welcome to any of them if perhaps they have the parts you need.

But honestly I do not have Eumigs available.

CG

Posted by Terry Lagler (Member # 1110) on May 08, 2008, 08:53 PM:

Hi Chip
Wow your post is timely although I don't know if you can help me.
I just picked up a B&H 456 Dual 8 machine at a garage sale in great working condition. Unfortunatly there is a rubber part that has turned to goo. There is a lever you push down and then feed the leader between a wheel and what would have been this rubber lower wheel. As I had to remove rubber (goo) you kind of have to manual feed it past this part.
Don't know if you know what I'm talking about or if you can even replace this part, but it would make this machine perfect again.
Cheers
Terry

UBB.classic^TM 6.3.1.2