Posts: 1733
From: Brooksville, FL
Registered: Jun 2003
posted May 05, 2008 12:23 PM
Items are free for parts and/or repair just pay shipping only.
Several Bell and Howell daul 8mm machines (projectors) some are missing parts - as bought by me through Ebay (i.e. powers on works ok have no film to test). These arrived basically DOA.
Anybody looking for parts should contact me. If no takers they're going to the dump but I will destroy them anyways so that dump scavangers can't do to someone else what they did to me.
Contact: chipgelmini@yahoo.com
May 15th they go to the dump act now before it's too late!
I ask becauwe one of my Eumig optical sound Super 8's is a Eumig Mark S, with a broken claw arm and by Gawd, if I can get a good used claw arm on that projector, then I'm back in business, with a very good Eumig back in service!
-------------------- "All these moments will be lost in time, just like ... tears, in the rain. "
posted May 08, 2008 08:53 PM
Hi Chip Wow your post is timely although I don't know if you can help me. I just picked up a B&H 456 Dual 8 machine at a garage sale in great working condition. Unfortunatly there is a rubber part that has turned to goo. There is a lever you push down and then feed the leader between a wheel and what would have been this rubber lower wheel. As I had to remove rubber (goo) you kind of have to manual feed it past this part. Don't know if you know what I'm talking about or if you can even replace this part, but it would make this machine perfect again. Cheers Terry