8mm Forum: Elmo ST 1200 part needed..

»	8mm Forum » 8mm equipment for sale/trade » Elmo ST 1200 part needed..

UBBFriend: Email this page to someone!

Author

Topic: Elmo ST 1200 part needed..

John Capazzo
Master Film Handler

Posts: 421
From: Hillside, NJ USA
Registered: Jan 2004

posted February 11, 2010 07:52 PM

Would anyone have the tension spring for an Elmo ST 1200? This is for the original ST 1200 machine (greenish) and it needs the spring that belongs near the top (when rear cover is removed) that keeps tension when changing 24/18. Without the spring, it won't rewind and engange properly. I also need the lamp setting knob. It's a cosmetic piece that smilply slips on the metal lamp switch when setting from off to 100-150 W. Thanks for any searches/help.--John

--------------------
"the image is about 30 feet ahead of us."

| IP: Logged

Robert Oakley
Film Handler

Posts: 46
From: Binghamton, NY
Registered: Dec 2003

posted February 13, 2010 05:14 PM

Can you send me a photograph, I got a ST 1200 parts machine.

| IP: Logged

Gian Luca Mario Loncrini
Phenomenal Film Handler

Posts: 1948
From: Verona (Italy)
Registered: Jan 2009

posted February 14, 2010 02:31 PM

John, contact also Mr Petrin, in case:

luigi.super8cine (at)fastwebnet (dot) it

Good luck.

--------------------
I remember when I was (super) 8 years old...

| IP: Logged

John Capazzo
Master Film Handler

Posts: 421
From: Hillside, NJ USA
Registered: Jan 2004

posted February 15, 2010 05:15 PM

Robert, are you willing to sell the entire machine as is? Thanks--John

--------------------
"the image is about 30 feet ahead of us."

| IP: Logged

Robert Oakley
Film Handler

Posts: 46
From: Binghamton, NY
Registered: Dec 2003

posted February 17, 2010 10:21 PM

Yes I can sell it - Email me and we'll discuss it.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2