8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm equipment for sale/trade   » Kodak M80 Parts Needed

 - UBBFriend: Email this page to someone!    
Author Topic: Kodak M80 Parts Needed
Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010


 - posted September 20, 2011 01:27 PM      Profile for Pasquale DAlessio     Send New Private Message       Edit/Delete Post 
I have a Kodak M80 that I need a couple of parts for.

Shutter Assembly with shutter gear.

Damping arm.

I have attached pics for reference.

Thanks

 -

 -

 |  IP: Logged

Chris Punzi
Film Handler

Posts: 34
From: Manassas, VA 20110
Registered: Jul 2011


 - posted September 21, 2011 02:13 AM      Profile for Chris Punzi   Author's Homepage   Email Chris Punzi   Send New Private Message       Edit/Delete Post 
The same things were broken on my m95! This link here at least has the damping arm and info on how to get the drive gear: http://www.kodakparts.com/KodakM.html

If you read through it you'll see you can download a service manual for free. My guess is that no one on this forum will have these parts, they've held up so poorly over the years that finding originals seems impossible anymore. My damping arm came apart in my hands, and the gear was nowhere to be seen either. I also suspect a gear like the one in this is what caused my instamatic m6 camera to stop working.

--------------------
-Chris

 |  IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010


 - posted September 21, 2011 06:33 AM      Profile for Pasquale DAlessio     Send New Private Message       Edit/Delete Post 
HI CFhris

Thanks for your reply. My damping arm fell apart the same way. They used to take the old shutter as a trade in and send you a new one with a metal gear. I have that manual and the prices on their parts is outrageous. I just got this for 5.00 as a project to see if I can fix it. I am going to try Mcmaster-Carr for just a metal gear to attach to the shutter. The damping are I can cut out of plexi and paint it black.

Pat

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2