This is topic Sankyo parts needed in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002446

---

Posted by Barry Webb (Member # 1897) on August 06, 2014, 01:22 PM:
 
Hi all I'm looking for a rear take up arm for a super 8 sankyo machine the part is for a sankyo 401 but the 500 600 and 700 series should fit it takes upto a 600ft reel.
Mine got damaged in transit and the machine is to good to scrap.
Hope someone can help.
Barry.
 

---

Posted by Terry Lagler (Member # 1110) on August 06, 2014, 04:49 PM:
 
Hi Barry
I have a junked Sankyo 700 that I've slowly been stripping for parts. I still have the rear take up arm and parts. The arm length is about 10-11 cm.
Don't know if it will work but you can have it for the price of shipping. It can be shipped small packet air for about $10 in a small sturdy box.


Cheers
Terry
 

---

Posted by Barry Webb (Member # 1897) on August 07, 2014, 08:29 AM:
 
Hi Terry,
Thanks for your reply yes that's the part I need don't know whats the best way to pay you I do have paypal and can do it that way.
Barry.
 

---

Posted by Phil Mitchell (Member # 3876) on September 29, 2014, 03:57 AM:
 
Hi Terry, I know post is almost 2 months old but are you still scrapping for parts the Sankyo?

I've had to resolder wires and replace one of the micro switches in my Sankyo 600, I assume the 700 have them as well.

Yet my mate took out one switch the reverse one and as you can see from photo, there appears to be a separator ( best word I can use to describe it) missing since switch came out, he doesn't remember and it is not in sealed bag I kept all parts in.

Would you mind looing at photo and see if your 700 has the same.
It appears important as when I put selector knob to neutral stop position the MS plunger lever is still pressing in enough on that switch to make motor run.

I know this is a long shot, but hey one never knows. thanks Phil




 

---

Posted by Terry Lagler (Member # 1110) on September 30, 2014, 07:12 PM:
 
Hi Phil
Just saw this post and took a look at what I have left and I don't have that piece unfortunately.

Sorry,
Terry
 

---

Posted by Phil Mitchell (Member # 3876) on October 03, 2014, 02:13 AM:
 
Thanks for getting back Terry,

Worth a shot.

Phil
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2