8mm Forum: Standard 8 rear sprocket

»	8mm Forum » 8mm equipment for sale/trade » Standard 8 rear sprocket

UBBFriend: Email this page to someone!

Author

Topic: Standard 8 rear sprocket

John Last
Expert Film Handler

Posts: 104
From: Codsall, UK
Registered: Dec 2012

posted June 21, 2018 09:20 AM

I am desperate to find a rear Standard 8 sprocket for a Eumig 710. One from an 802 or 810 will do. Can anyone help please?

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted June 21, 2018 10:21 AM

John, if it's one of these, I can help you.
However, as I said, I was not sure of its projector of origin, but if you recognize it, it's OK.
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=003329

| IP: Logged

John Last
Expert Film Handler

Posts: 104
From: Codsall, UK
Registered: Dec 2012

posted June 21, 2018 03:40 PM

Thanks Luigi, The black ones are the ones that I want. How do I pay you? John

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted June 21, 2018 05:59 PM

Paypal is fine.
Give me your address in private.
I sent items to other English users of this forum, but heavier items, I don't remember how much I paid for shipping.
With a little package we should be in a low amount (6.60 euros, I hope, or about):
https://www.poste.it/prodotti/raccomandata-internazionale.html
I write to you in private. [Smile]

EDIT: I can't write to you in private, the email is blocked.
You can provide me with an address where I can contact you, or contact me at the private forum email. [Smile]

[ June 22, 2018, 08:37 AM: Message edited by: Luigi Castellitto ]

| IP: Logged

John Last
Expert Film Handler

Posts: 104
From: Codsall, UK
Registered: Dec 2012

posted June 24, 2018 04:16 PM

Sorry, my computer is locked and I cannot proceed. Consider this item is closed.

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted June 25, 2018 09:15 AM

No problem, John. [Smile]

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2