8mm Forum: Wanted: 'Scope lens swing bracket for GS1200 ("Centa swing")

»	8mm Forum » 8mm equipment for sale/trade » Wanted: 'Scope lens swing bracket for GS1200 ("Centa swing")

UBBFriend: Email this page to someone!

Author

Topic: Wanted: 'Scope lens swing bracket for GS1200 ("Centa swing")

Stefano Medda
Junior
Posts: 5
From: Cagliari, CA, Italy
Registered: Sep 2013

posted January 27, 2019 08:58 AM

Hello,
I am looking for the anamorphic lens swing bracket for the Elmo GS 1200... I am searching one of these: http://www.bfcc.biz/london8.jpg

Thank you in advance,
Stefano

| IP: Logged

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004

posted January 28, 2019 05:20 AM

Hello Stefano

I have one for sale shown in my picture below - this is for 52mm barrel anamorphic lenses ie: Kowa 8Z / Kowa 16H / Elmoscope / Fumeo & Sankor 16D.

Including signed for and tracked Airmail postage to Italy my price is £65 payable via PayPal.

If you want to proceed please send me a PM message.

Kevin.

| IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003

posted January 28, 2019 09:15 PM

Kevin, will that bracket work for ST-1200 (with or without a small modification)?

--------------------
Winbert

| IP: Logged

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004

posted January 29, 2019 03:00 AM

Hello Winbert

Stefano has purchased this one from me but if I see another I will let you know - you can modify the ST1200 by removing the inching knob and little shaft (keep it safe for future use though) that protrudes from the front right edge of the projector and that way I think a Centaswing bracket or similar will fit.

For the ST1200HD the bracket I used in the 80's was a fixed version that was purposely designed by Dave at Spondon to fit without the need to remove the inching knob. I may have a picture of one somewhere.

Kevin

| IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003

posted January 29, 2019 03:14 AM

quote:
I may have a picture of one somewhere.

I am not sure if it is you or someone else mentioned it, do you know if Elmo 16CL bracket can been modified to fit ST-1200/GS-1200?

If it was you, can you send a picture how you do that please.

thanks

--------------------
Winbert

| IP: Logged

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004

posted January 29, 2019 03:54 AM

I gave up on that project Winbert it would have needed drill holes and an additional bracket to work, best to keep them for the 16mm machines they are designed for.

Kevin.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2