8mm Forum: Projex in Plymouth (Elf/Eiki)

»	8mm Forum » 16mm Forum » Projex in Plymouth (Elf/Eiki)

UBBFriend: Email this page to someone!

Author

Topic: Projex in Plymouth (Elf/Eiki)

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004

posted May 17, 2009 05:05 PM

Projex in Plymouth had what must have been the UK's best stock of Eiki spares and projectors, so it's worrying that their website no longer seems to be operating. I wondered if Tom (as a Plymouth resident) or anyone else might know if they have shut down. The guy who ran it mentioned health concerns to me about 3 years ago, which might be the explanation. If they have closed, I hope someone buys all the spares as it would be terrible if they ended up in a skip.

--------------------
Adrian Winchester

| IP: Logged

Christopher Gillan
Junior
Posts: 22
From: Bridestowe Devon
Registered: Jan 2009

posted May 18, 2009 05:34 AM

Adrian

Do you know where in plymouth projex was i will check out next time i am there.

Regards Chris

| IP: Logged

Martin Jones
Phenomenal Film Handler

Posts: 1269
From: Thetford , Norfolk,England
Registered: May 2008

posted May 18, 2009 05:55 AM

He worked from a private house over in the Mountbatten? area. I'll try and locate his address from ACE back issues
EDIT: Last address I cvan find is ... 39, Abney (yes, ABNEY) Crescent, Roborough, Plymouth. PL6 6LH... Tel No.01752 214654.
This is from ACE Winter 2002 Issue.
Martin

[ May 18, 2009, 07:59 AM: Message edited by: Martin Jones ]

--------------------
Retired TV Service Engineer
Ongoing interest in Telecine....

| IP: Logged

Stuart Reid
Jedi Master Film Handler

Posts: 720
From: Worthing, West Sussex, UK
Registered: Feb 2009

posted May 18, 2009 10:06 AM

Adrian, please report back if you have success - he was a great guy to deal with, did a lovely job serving my Elf Xenon a few years back.

| IP: Logged

David Erskine
Expert Film Handler

Posts: 230
From: Letchworth Garden City, Herts
Registered: Aug 2008

posted May 18, 2009 11:13 AM

I spoke to him a few months ago - he'd been in hosp - but appeared to be intent on carrying on. Certainly hope so. David E

--------------------
I've NEVER let failure go to MY head!

| IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004

posted May 18, 2009 05:46 PM

Thanks for the replies. The address mentioned by Martin was certainly correct 2-3 years ago. The proprietor's name is Bob Halls. I found him very helpful but he could be a bit eccentric in the sense that I know of at least 2 people who were keen to buy spares from him but never managed it, because Bob never got back to them to advise of availability and price, however many times they tried asking! He had the rare distinction of being able to regularly order new spares direct from Japan, and I suspect that he was the only person in the UK able to do this without going through the official UK Eiki agents (AVM Ltd).

--------------------
Adrian Winchester

| IP: Logged

David Erskine
Expert Film Handler

Posts: 230
From: Letchworth Garden City, Herts
Registered: Aug 2008

posted May 19, 2009 06:21 AM

He told me that AVM had handed all dealngs with real film to him and he had spares and could order direct as they weren't interested. DE

--------------------
I've NEVER let failure go to MY head!

| IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004

posted May 19, 2009 07:53 PM

That's probably a good thing if he's able to carry on, but not encouraging if he isn't. I did once manage to order something via AVM (a remote control for an Eiki ENT) when Bob thought he wouldn't be able to get one. I was told it was one of the last two left in the factory.

--------------------
Adrian Winchester

| IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004

posted January 04, 2011 09:06 AM

I wondered if David (or anyone) has heard anything with regard to Projex/Bob Halls since the earlier posts here? Their phone number can still be found on one or two sites so I just tried ringing, but it has been disconnected. I hope Bob is OK. It would be bad news for UK Eiki owners if Projex has permanently shut down, as if AVM are not interested, I don't suppose there's anyone else in the UK who has a stock of spares or can order from Eiki.

--------------------
Adrian Winchester

| IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004

posted August 02, 2014 12:59 PM

I don't suppose anyone has heard anything else about Projex since the previous correspondence? If Bob Halls had to abandon any plans to continue the business, it would be very sad if his large stocks of Eiki spares ended up in a skip! Sad also that we've lost David Erskine, who shed some light on this.

Tom (if you read this): as a Plymouth man, did you ever visit the Projex premises? If so, was it some sort of workshop with a lot of visible projector spares?

--------------------
Adrian Winchester

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2