This is topic Elf RTM in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000641

Posted by Colin Robert Hunt (Member # 433) on May 13, 2011, 02:31 PM:
 
I need some help on this projector. The problem is the ceramic lamp holder has one of the connections missing. All was fine till the lamp just went out part way through a ahow and the rcontact that engages on the lamp pins has broken and looks like it's missing. This particuler part is rivited on to the frame that carries the bulb and is screed to the main casting, The wires dissaper in to the back. Does anyone know how I can replace this part and where I can buy a replacement. Any help would be very wellcome.
 
Posted by Michael O'Regan (Member # 938) on May 13, 2011, 02:53 PM:
 
Can't help you with that, Colin but hopefully we'll see Rose and yourself tomorrow??
 
Posted by Richard C Patchett (Member # 974) on May 13, 2011, 07:34 PM:
 
Greetings Colin
I may have a few in stock part number is 320-32801 Lamp Socket SL $26.40 On what you said in your post this describes the same I know this is for the sl and your looking for the ELF should be the same. It takes the ELC Lamp.
May be returned - postage
Visit my web site to order.
 
Posted by Colin Robert Hunt (Member # 433) on May 17, 2011, 03:14 PM:
 
Thanks Richard for your help. Just checking out the options now. Great wesite by the way.
 
Posted by Michael O'Regan (Member # 938) on May 17, 2011, 04:46 PM:
 
Colin, did you try Classic?
 
Posted by Lee Mannering (Member # 728) on May 18, 2011, 05:16 AM:
 
Colin try Buckingham Films if you get stuck. Tony I am sure will be able to help you with parts.
 
Posted by Colin Robert Hunt (Member # 433) on May 18, 2011, 07:24 AM:
 
Thanks Lee local to me and not thought of them. Mike I did e-mail them along with another inquiry. Basicaly the reply was unable to help. Mods are a option and let them know for more info. A company of few words and did not expext more. Thanks again everyone including CHC.
 
Posted by Ian John (Member # 507) on June 09, 2011, 07:30 PM:
 
Hi Colin, You should be able to pick up a lamp base socket Maplins.co.uk You just push it onto the two pins of the lamp. The socket has a ceramic base.

http://www.maplin.co.uk/search?criteria=2+pin+dichroic+lamp+base+socket

Below is the wording from maplins web site:

Dichroic Lamp HolderA porcelain lampholder for use with low voltage ceiling fittings which take standard dichroic lamps and any two-pin lamp with a GX5.3 base. Cable 100mm long
VJ11M
only £3.49
In Stock

Ian.
 
Posted by Colin Robert Hunt (Member # 433) on June 10, 2011, 02:50 PM:
 
Thanks Ian I will try them. Thanks for your effort for me.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2