8mm Forum: Elf RTM

»	8mm Forum » 16mm Forum » Elf RTM

UBBFriend: Email this page to someone!

Author

Topic: Elf RTM

Colin Robert Hunt
Expert Film Handler

Posts: 226
From: Milton Keynes Buckinghamshire
Registered: Aug 2005

posted May 13, 2011 02:31 PM

I need some help on this projector. The problem is the ceramic lamp holder has one of the connections missing. All was fine till the lamp just went out part way through a ahow and the rcontact that engages on the lamp pins has broken and looks like it's missing. This particuler part is rivited on to the frame that carries the bulb and is screed to the main casting, The wires dissaper in to the back. Does anyone know how I can replace this part and where I can buy a replacement. Any help would be very wellcome.

| IP: Logged

Michael O'Regan
Film God

Posts: 3085
From: Essex, UK
Registered: Oct 2007

posted May 13, 2011 02:53 PM

Can't help you with that, Colin but hopefully we'll see Rose and yourself tomorrow??

| IP: Logged

Richard C Patchett
Master Film Handler

Posts: 424
From: Flint Mi 48506
Registered: Dec 2007

posted May 13, 2011 07:34 PM

Greetings Colin
I may have a few in stock part number is 320-32801 Lamp Socket SL $26.40 On what you said in your post this describes the same I know this is for the sl and your looking for the ELF should be the same. It takes the ELC Lamp.
May be returned - postage
Visit my web site to order.

--------------------
RC’s Classic Collection
16 mm Parts & Service
Elmo, Eiki, Bell & Howell +
http://www.rcsclassic16mm.com/

| IP: Logged

Colin Robert Hunt
Expert Film Handler

Posts: 226
From: Milton Keynes Buckinghamshire
Registered: Aug 2005

posted May 17, 2011 03:14 PM

Thanks Richard for your help. Just checking out the options now. Great wesite by the way.

| IP: Logged

Michael O'Regan
Film God

Posts: 3085
From: Essex, UK
Registered: Oct 2007

posted May 17, 2011 04:46 PM

Colin, did you try Classic?

| IP: Logged

Lee Mannering
Film God

Posts: 3216
From: The Projection Box
Registered: Nov 2006

posted May 18, 2011 05:16 AM

Colin try Buckingham Films if you get stuck. Tony I am sure will be able to help you with parts.

| IP: Logged

Colin Robert Hunt
Expert Film Handler

Posts: 226
From: Milton Keynes Buckinghamshire
Registered: Aug 2005

posted May 18, 2011 07:24 AM

Thanks Lee local to me and not thought of them. Mike I did e-mail them along with another inquiry. Basicaly the reply was unable to help. Mods are a option and let them know for more info. A company of few words and did not expext more. Thanks again everyone including CHC.

| IP: Logged

Ian John
Film Handler

Posts: 54
From: South Wales United Kingdom
Registered: Dec 2005

posted June 09, 2011 07:30 PM

Hi Colin, You should be able to pick up a lamp base socket Maplins.co.uk You just push it onto the two pins of the lamp. The socket has a ceramic base.

http://www.maplin.co.uk/search?criteria=2+pin+dichroic+lamp+base+socket

Below is the wording from maplins web site:

Dichroic Lamp HolderA porcelain lampholder for use with low voltage ceiling fittings which take standard dichroic lamps and any two-pin lamp with a GX5.3 base. Cable 100mm long
VJ11M
only £3.49
In Stock

Ian.

| IP: Logged

Colin Robert Hunt
Expert Film Handler

Posts: 226
From: Milton Keynes Buckinghamshire
Registered: Aug 2005

posted June 10, 2011 02:50 PM

Thanks Ian I will try them. Thanks for your effort for me.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2