This is topic Bell & Howell wormgear 1695 in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001167

---

Posted by Barry Webb (Member # 1897) on September 03, 2014, 02:41 PM:
 
Hi just finished replacing the wormgear on my B&H 1695 on testing the projector it seem that the claw timing in out the film runs ok but when you adjust the frame the film starts to make noise.
The top and bottom loop are also fine when running forward but it loses its top loop when I put it in reverse.
This is the first one I have had any trouble with.
Any help would be very much appreciated.
Barry.
 

---

Posted by Pasquale DAlessio (Member # 2052) on September 03, 2014, 08:22 PM:
 
Hi Barry

Don't put it in reverse! Problem solved!

PatD
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2