This is topic Have found a projector.. in forum 16mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001189
Posted by William Fleming (Member # 2632) on October 24, 2014, 01:55 PM:
It is a Bell and Howell 16mm projector in good working order. TQ111 Filmosound. i found it advertised on a local selling page and they want £25 for it. Is this a good model or anything i should watch out for? Thanks in advance
Posted by Maurice Leakey (Member # 916) on October 24, 2014, 02:03 PM:
It could have trouble with a cracked worm. Ask to take the back off and inspect the worm with a torch, rotate it by use of the inching knob and see it there are any cracks in it.
If there are cracks then they will only get larger resulting in the need of a new worm and ancillary items. If done professionally it could cost up to £200.
If the worm is totally black in colour then it is fairly new, the one-piece item was introduced to replace the original worm which was of a two-piece construction.
Proceed with caution, if the worm is OK then the Bell & Howell range are great projectors.
Posted by William Fleming (Member # 2632) on October 24, 2014, 02:08 PM:
Maurice have just watched a video to understand what you mean. I have it now so will definateley be looking at it tomorrow before purchase. Thanks for that as would not have known.
Posted by Dominique De Bast (Member # 3798) on October 24, 2014, 02:19 PM:
A wise thing to do is to run it with a (non precious) film. If everything goes right, it is a good start :-)
Posted by William Fleming (Member # 2632) on October 24, 2014, 02:32 PM:
There in lies a problem :/ i dont have any movies and neither do they. At £25 i am happy to get it if worm gear is ok and will look for a cheap short to put through it if it runs then great if not then not a massive loss. I am looking at it more as a starter to lead me up to the fair in Blackpool where hopefully i can pick up something much nicer
Posted by David Guest (Member # 2791) on October 24, 2014, 02:35 PM:
if I was you I would wait for blackpool I have loads of projectors and films that I will be taking .or come to my home in southport and have a browse round my very large collection of films and lenses and projectors before I start to load them up for blackpool .any one else interested in coming to my home email to arrange a viewing thanks
Posted by William Fleming (Member # 2632) on October 24, 2014, 02:59 PM:
Hi David i have sent you an email thanks.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2