8mm Forum: B&H 16mm 1535

»	8mm Forum » 16mm Forum » B&H 16mm 1535 - Charcoal

UBBFriend: Email this page to someone!

Author

Topic: B&H 16mm 1535 - Charcoal

Clinton Lynch
Junior
Posts: 9
From: Denton, TX, USA
Registered: Jan 2016

posted January 31, 2016 11:31 AM

Hello,

I am having some issues with my sound pot on this projector, it goes from low to overly loud and there is no in between, I tried using a pot cleaner and it may have worked a little bit, but it still needs to be replaced. I cannot seem to find any parts for this online besides just buying a whole new projector for parts.

Next question is, If I were to buy a B&H speaker for this projector would the sound be transferred all to the speaker, or will sound come from both the projector and the speaker?

| IP: Logged

Paul Mason
Jedi Master Film Handler

Posts: 540
From: Aldershot, Hampshire, UK
Registered: Nov 2013

posted February 01, 2016 05:17 AM

Hi Clinton,

Your best bet is to buy a new amp circuit board with the pots built in and replace the old board. Richard Patchett of this forum might be able to sell one. The B & H speaker with the correct plug will cut out the internal speaker.

--------------------
Paul.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2